|
|
Freshwater Community Aquarium
History
A freshwater community aquarium seems to be a popular first choice amongst new aquarium hobbyists. These style aquariums allow you to keep a large number of different fish making it a great choice if you want to keep a “fish tank”. There are many different places in the world to choose fish from. You could recreate an East Asia stream, South American River or an Africa Rift lake. Aqua Buys recommends replicating these environments as closely as possible. The recreation of an aquatic ecosystem in another part of the world makes for great conversation when someone asks about your aquarium and will increase your enjoyment of the aquarium hobby. You don’t have to choose your fish this way. You could choose the fish that appeal to you. Always check compatibility (is this fish a bully?) and choose fish that like similar water conditions especially pH and temperature. Aquarium
Filtration
Lighting
Heating
Other Equipment
Successfully keeping a community of fishes requires a basic understanding of the animals you plan to keep. Knowing fish compatibility is also important. Setting up the right environment and water conditions for a certain group of fishes insures a higher level of success. Most freshwater fish will do well with a simple environment of gravel substrate, some rocks, driftwood and some live plants. Some good basic plants: Java Fern (Microsorum pteropus) Substrate If you plan to add live plants to your aquarium you may want to add some Laterite to your gravel to increase the richness of your substrate. Laterite provides fertilizer directly to rooted plants. Add about 1 to 1.5 oz of Laterite per gallon.
There are a large variety of conditions that freshwater tropical fish inhabit. The South American Streams and Rivers are about 81 degrees, pH 6.6 and KH 2-3. The Rift Lakes in Africa are 76 degrees, pH 8.1 and KH 6-9. Most freshwater tropical fish can be kept in the following range of conditions: Additives
This chart is a timeline describing step-by-step setup of your Freshwater Community aquarium. After the chart is an explanation of each step.
Research We will recommend a few fish (see below) that look great together and are fairly easy to get started with. This will include some utility fish to help scavenge the aquarium. Equipment and Setup
Wet Test Plug the equipment into a power strip and the into a GFCI outlet. The use of a Ground Fault Circuit can save you and your fishes from some dangerous shocks. Turn on the filter and heater to check that everything is working. Set the heater for about 76 degrees. Use the thermometer to check the temperature. Let the equipment run for about an hour or two to make sure the heater and filter are working. After your happy with the equipment you can turn everything off and drain the aquarium an inch or so of water left. Aquascaping After adding your gravel you can then fill the aquarium about 1/3 and then add any plants, driftwood and other decorations. Fill the aquarium the rest of the way, plug all of the equipment back in and turn the filter and heater back on. You can add fish as soon as the water clears up and the tank is at the right temperature. This will likely take several hours to overnight. Only add 1-2 hardy fish when you first setup. Begin the Cycling process Water Changes Here are a couple of fish recommendations and a good scavenger. This group of fish will do well in as a small community.
Stocking
Another method is to base it on total aquarium volume. Recommendations of 1” of adult fish per gallon are common.
Fish larger than 4 inches at adult size should be kept in larger aquariums of at least 36 inches wide and 50 gallons or more. Feeding your fish a variety diet beyond just a can of flake food is important. Fish can develop deficiencies without the right foods. To feed your fish properly you need to know whether your fish are omnivores (plants and meat eaters), herbivores (plant eaters) or carnivores (meat eaters). The fish mentioned earlier in the article were omnivores. Here is a good omnivore diet for tropical fish:
Water changes You should change about 10% (minimum) of the water in the aquarium about twice a month. A good way to remember is to do water changes on the 15th and 30th day of each month. In a 20 gallon aquarium you will change about 2 gallons. Fill a bucket with about 2 gallons of water and treat it with water conditioner. Test the temp and adjust it to match your aquarium. Drain about two gallons from your aquarium (time for another bucket) and then pour the new treated and temp adjusted water back in. You will need to vacuum parts of the gravel every month or two to clean up excess mess left by the fish. Take care not to plunge a gravel vacuum too deep if you have live plants.
Filter Maintenance Cleaning the Glass
Acrylic aquariums must be treated with special care since acrylic scratches very easily. Be sure to use cleaning devices designed for use on acrylic aquariums. Wipe down the outside of the tank with a damp cloth (water/vinegar only) and then polish it with a dry one. Try to avoid using household cleaners and sprays around your fish aquarium. Check out some of these aquarium books for more information on fish keeping.
Sam Pol 30 years ago Sam Pol didn't know he would still be keeping aquariums today...what he did know is that aquariums were fascinating. He used to "collect things" from the Gulf beaches at low tide to take back and stock his trio of 10G "Metaframe" saltwater tanks. That fascination of "fish tanks" continues today. Sam has been sharing his experiences of both freshwater and saltwater aquariums for several years now through his articles appearing here on aquabuys.com. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||